| Author |
 Topic  |
|
|
vesperhbt
Advanced Member
USA
445 Posts |
 Posted - 25/10/2009 : 2:23:55 PM
|
I wanted to make a simple motor for testing with 3 coils and the battery swapping circuit. I have down loaded the Daffmans diagrams and have built the charging circuit and a school girl circuit.
my questions are simple?
1.I assume that in a 3 coil motor each coil needs to have a school girl circuit to run the motor? is this correct??
2. can one school girl circuit run all 3 drive coils?
1A. Does any one have the wiring diagram for hooking up 3 drive coils off the school girl circuit?
2A. how does this all hook up to the charging swap over circuit?
I want to test this way of running the motors for a base reference. I use a different control system for my motor and I want to try this School girl way to see the results.
If some one can send the diagrams that would be a great help.
Thank you
vesperhbt.
|
|
|
vesperhbt
Advanced Member
USA
445 Posts |
Posted - 27/10/2009 : 6:53:26 PM
|
Can any one help this old circuit out?
vesperhbt |
 |
|
|
cass
Senior Member
USA
138 Posts |
Posted - 27/10/2009 : 9:56:47 PM
|
hey vesperhbt i dont know if this is what you want, but it shows how to hook up three different coils together..however they are trifilar coils and each coil set up has its own circuit...well anyways this is what i plan on making on my college brake, here is the site where i found it, there are some good animations too...
http://www.wilhoit-az.com/mark/free_energy/MAllen7424.php#animated
carmin |
|
|
|
vesperhbt
Advanced Member
USA
445 Posts |
Posted - 28/10/2009 : 08:42:09 AM
|
Great thank you I have seen this site and looked it over some time ago, I see the circuit that you are referencing to. good information.
vesperhbt |
|
|
|
cass
Senior Member
USA
138 Posts |
Posted - 28/10/2009 : 3:32:13 PM
|
any time vesperhbt, this is what i plan on building also but instead of the reed switches i would like to use the 555 timer set up. if you get it working i would like to see how it turns out..
carmin |
|
|
|
vesperhbt
Advanced Member
USA
445 Posts |
Posted - 30/10/2009 : 08:18:58 AM
|
That would be my pleasure I'm redesigning my timer circuit right now so that it has a much quicker response time I will use a 556 timer the 555 works well too I use a duel pulse system to each power coil with reset triggering by the following coil. It is very fast and hard to get the timing correct but worth the time since once it is set it does not change.
I'm designing the circuit now for board production for easy assembly. Once I have it complete I will video and make the set out available to every one.
I am also working on a quad timer for 4 coils in one circuit but having a bit of a time getting it to work correct.
vesperhbt. |
|
|
|
cass
Senior Member
USA
138 Posts |
Posted - 30/10/2009 : 8:32:32 PM
|
yes very nice, please do post it, i am saving up my money so i can buy everything that i plan to build using this system, there will be a low input high output alternator---a performance alternator from a street car, i am also going to make a type of alternator, and i plan to use three trifilar coils in this set up. also everything will be gear trained. i am very interested in seeing how your set up ends up working. good luck with everything
carmin |
|
|
|
vesperhbt
Advanced Member
USA
445 Posts |
Posted - 30/10/2009 : 9:06:27 PM
|
Well I just have to finish designing it in AutoCad then I can start the process of building. So in about a week or two I should have everything designed and all the tolerances in place for the newest motor design.
I am working all the bugs out in 3D before I waste to much time and money on design changes.
I hope to see your motor soon as well good luck with it and have fun.
vesperhbt
|
|
|
|
vesperhbt
Advanced Member
USA
445 Posts |
Posted - 12/11/2009 : 2:31:30 PM
|
Any one want to take a stab at the hooking up of the battery swapping circuit to the schoolgirl circuit by the Daftman? Who has a complete drawing on this and wants to share?
vesperhbt
"The power to change the world"
www.youtube.com/vesperhbtmotor |
|
|
|
cass
Senior Member
USA
138 Posts |
 Posted - 12/11/2009 : 3:54:18 PM
|
hey vesperhbt try this out...im not sure if it works so sorry to everyone if i got it wrong, i havent tried it yet..
"Think of an Idea to Change our World, and put it Into Action"
http://www.youtube.com/cas15n |
|
|
|
BiDaDiKuNuKu
Advanced Member
Netherlands
333 Posts |
Posted - 12/11/2009 : 4:13:55 PM
|
what cass has drawn looks oke 2 me...:)
or just go straight from battery 1 to primary and battery 2 to charge battery...or the other way around...
BUT i might be completely wrong here...:P...got all compoments 4 this Bat Swap but ima still havent made 1 yet...:)
Peace!
V2DAY
http://www.youtube.com/user/BiDaDiKuNuKu
"1 often meets his destiny on tha road he takes 2 avoid it" |
|
|
|
vesperhbt
Advanced Member
USA
445 Posts |
Posted - 12/11/2009 : 7:57:55 PM
|
It looks correct to me as well thank you Cass... Bida, you need to get on it LOL, M8...
vesperhbt
"The power to change the world"
www.youtube.com/vesperhbtmotor |
|
|
|
cass
Senior Member
USA
138 Posts |
Posted - 12/11/2009 : 9:21:27 PM
|
ya i havent made it yet so i dont know if it is the right connections hopefully theDaftman doesnt get mad...lol but i dont plan on using this my set up will be totally different and i dont think it would work the way i want it to with the swapper.
"Think of an Idea to Change our World, and put it Into Action"
http://www.youtube.com/cas15n |
|
|
|
vesperhbt
Advanced Member
USA
445 Posts |
Posted - 12/11/2009 : 10:28:39 PM
|
Cool I hope to see your work soon good ideas are what makes us grow.
vesperhbt.
"The power to change the world"
www.youtube.com/vesperhbtmotor |
|
|
| |
Topic |
|
Conecting school girl to change over circuit?
