| Author |
 Topic  |
|
|
teep
Forum Admin
United Kingdom
347 Posts |
|
|
oldHermit
Starting Member
USA
16 Posts |
Posted - 23/08/2009 : 1:21:28 PM
|
Just watched part one. Waiting for part two. Now I know what to do with these old monitors I have laying around in the attic.
Thanks.
oldHermit |
 |
|
|
teep
Forum Admin
United Kingdom
347 Posts |
Posted - 23/08/2009 : 1:48:50 PM
|
Let us know if you build anything out of them then please.
I thinking of doing another one based on an old large TV may even use the magnets off the speakers.
Yours theDaftman TEEP forums administrator.
See my videos on YouTube.
http://uk.youtube.com/theDaftman |
|
|
|
stringguy
Starting Member
Ireland
2 Posts |
Posted - 24/08/2009 : 05:58:38 AM
|
great vids, 400 feet of wire, 2 sizes, and a safe way to disassemble a monitor
well done D.M. |
|
|
|
Fischer
Starting Member
17 Posts |
Posted - 28/09/2009 : 2:59:31 PM
|
Hi everybody,
I've built Bedini SSG using Daftmans Draft. Unfortunately without success for the moment. I've done different versions of(coils, rotors and also of the general set up). And have also changed all the components several times just in case,
I'd appreciate if someone could give me a clue of where it can be going wrong.
Facts:
1) I'm using a 14.4V power supply.
2) I'm using exactly the same wires recommended by Daftman in videos. (.71 mm for the run coil and .223 for the trigger)
3) The circuit only works when the resistor is at full resistence (980 ohms) if I lower it down it stops working. The coil does a slight beeeeee noise.
4) When the the coil is doing the beeeee noise it gets hot (not too much) and attracts the magnets but when I push the rotor round it won't last for long. What I see is that there is no repulsive force going to the magnets when they pass by the coil. It seems as the transistor is not doing proper work. The trigger coil looks to me doesn't power the transistor (TIP 3055) to give a load to the run coil and get the magnets going round.
5) It seems to me it has something to do with the potenciometer but i don't know...
Has any body got any clue.
Thanks
Fischer
|
|
|
|
teep
Forum Admin
United Kingdom
347 Posts |
Posted - 29/09/2009 : 03:44:03 AM
|
Fischer
Please post detailed photos/video of you setup so we can see what’s going on.
Yours theDaftman TEEP forums administrator.
See my videos on YouTube.
http://uk.youtube.com/theDaftman |
|
|
|
comwarrior
Moderator
United Kingdom
477 Posts |
Posted - 29/09/2009 : 11:39:00 AM
|
the wires to the drive coil are the wrong way around... Possibly the trigger coil too...
Double check that the diode from the transister emitter to the transister base is working and it is the right way around... (stripe on the base side)
If that doesn't work, repost in the pulse motors section please...
----------------------------------------------------------------------------------------------------------
Generator Systems Moderator
"Energy can not be created nor distroyed, it can only be changed into other forms" - so lets do some changing!
"Every Action has an equal and opposite re-action" - Why not use the re-action to create an additional action?
95% efficiency, I dare you to do better!
http://www.youtube.com/user/comwarrior69 |
|
|
|
Fischer
Starting Member
17 Posts |
Posted - 29/09/2009 : 5:17:29 PM
|
Hi,
I here attach a link with some photos of the circuit. I've double checked all conections... I've also tried getting less magnets (First set up was whit 6 magnets (15mm diam. x 8 thickness) and now i've set it up with 3 magnets.
I've also given 300 turns more to the trigger coil (now it has 800 turns) and 500 the run coil.
Here are the photos:
http://picasaweb.google.es/wandebon/Bedini#
Thanks for your help.
Regards,
Fischer
|
|
|
|
comwarrior
Moderator
United Kingdom
477 Posts |
Posted - 29/09/2009 : 8:22:26 PM
|
Please re-post in the pulse motor section with all the info...
----------------------------------------------------------------------------------------------------------
Generator Systems Moderator
"Energy can not be created nor distroyed, it can only be changed into other forms" - so lets do some changing!
"Every Action has an equal and opposite re-action" - Why not use the re-action to create an additional action?
95% efficiency, I dare you to do better!
http://www.youtube.com/user/comwarrior69 |
|
|
|
vesperhbt
Advanced Member
USA
445 Posts |
Posted - 30/10/2009 : 9:28:53 PM
|
Looking at your photos that you uploaded I can not see how you place your coil to your rotor at a set distance. But more to the point I see you are using allot of wire in your circuit of a heave gage this may or may not be a factor.
What I would recommend that you do is go to the all forums area and click on the Bedini circuit page by Mr Teep and click on his set out down load and print it out and make the circuit right on the paper.
I think you will find that Mr Teep is brilliant at this set out and will make the process easy and with out errors.
Once you build in this way you can start modifying this to fit your needs, but I would start there first, to remove all problems.
Also your coil needs to be bi-filur and both wires wound to 500 turns at the same time on the spool, the Ohms on the finished spool are very important as well for a working motor.
Well I hope that this helps a little.
vesperhbt |
|
|
| |
Topic |
|
Reclaiming parts projects
Posted - 23/08/2009 : 1:14:48 PM