One thing I forgot to mentioned in my post --- that is about the supply of power to my circuit. I am using 240 volts AC to 12 Volts / 3.5 Amps DC SMPS power supply. In this I have used 2 capacitors for reducing the ripple. Is that okay?
ripple reduction... Caps should re rated at 15 volts (for a 12V system), i reccomend 5,000uF per AMP that your drawing... Multiple capacitors are better than one big one since they shair the loads and stresses...
right, i'm going to say this once again and once only... in order to diagnose the problem I need circuit schematic and lots of high resolution pix of your build and circuit boards...
PS: don't put a cap on the back EMF output to the battery...
"Energy can not be created nor distroyed, it can only be changed into other forms" - so lets do some changing! "Every Action has an equal and opposite re-action" - Why not use the re-action to create an additional action?
I for one would love to hear how thew test went. I thought these Bedini circuits did not run a load directly from a charging battery. you charge it , remove and use it. Am I mistaken?
****Its like building a puzzle but you have never seen the picture, and you only get 3 pieces a week.****
help with this SS Charger...Please!
